Excavator Demolition Grapple

A demolition site leaves a mess behind: broken concrete, rebar, scrap steel, mixed debris that has to be sorted and loaded before it goes anywhere. That's the job of this excavator demolition grapple. It grabs loose material in bulk, big pieces and small together in one bite, swings 360° to drop it where you want it, and keeps the machine working without a crew shoveling by hand.

Send Inquiry

Product Features

Grabs mixed sizes in one bite. Small pieces and large chunks go up together, no need to pre-sort on the ground.

Abrasion-resistant steel plates. The shell is built to take wear from concrete and scrap, so it holds up longer between overhauls.

M+S motor with brake valve. The hydraulic motor turns the grapple a full 360°; the brake valve holds the load in place while it's being moved.

Simple, stable, low-failure. Fewer moving parts to go wrong, easy to operate from the cab.

Product Parameters

Model	Suitable Weight	Rotate Angle	Jaw Opening	Height	Width	Working Pressure	Working Flow	Weight
Unit	ton	.	mm	mm	mm	kg/cm²	l/ min	kg
DHG-02/04	5-9	360	1560	1020	600	120-160	50-100	350
DHG-06	10-17	360	2070	1380	800	150-180	90-110	950
DHG-08	18-24	360	2150	1550	950	160-180	100-140	1350

Core Advantages

Cuts handling time. One grab lifts what used to take several passes with a bucket or a crew by hand.

Covers the whole range. Concrete rubble, scrap steel, bulky demolition waste-it loads trucks and feeds sorting lines.

Full rotation, no repositioning. The 360° swing drops material exactly where it's needed without driving the machine around.

Matched to your machine. Three models fit excavators from 5 to 24 t. If yours sits in that range, one of these will line up.

Hot Tags: excavator demolition grapple, China excavator demolition grapple manufacturers, suppliers, factory