Excavator Flail Mower Attachment
Excavator Flail Mower Attachment
The Excavator Flail Mower Attachment is intended for vegetation maintenance where an excavator can provide better reach and positioning than conventional mowing equipment.
It can be used for cutting grass, weeds and bushes along hillsides, roads, ditches, utility right-of-ways, riverbanks and lake areas. This makes it particularly useful for vegetation management on uneven or difficult-to-access ground.
Designed for Routine Clearing
Our Excavator Flail Mower Attachment uses replaceable high-quality blades, while chains help contain grass and vegetation during operation. Customization is also available according to the supplied product information.
Five models are listed, covering excavators from 1.5 to 24 tons, with working widths from 800 mm to 1400 mm.
The model should be selected according to the excavator's weight, hydraulic flow and required cutting width.
Suitable Applications
Roadside vegetation maintenance
Ditch clearing
Slope mowing
Riverbank maintenance
Bush and grass cutting
Utility corridor clearing
FAQ
Can the blades be replaced?
Yes. The supplied specifications state that the blades are replaceable.
Can the mower be customized?
Yes, customization is supported.
What excavators can be matched with it?
The listed models are suitable for approximately 1.5–24 ton excavators.
Product Parameters
|
Model |
Suitable Weight |
Working Pressure |
Working Flow |
Width |
Weight |
|
Unit |
ton |
Kg/cm² |
l/ min |
mm |
kg |
|
DHG-01 |
1.5-3 |
200 |
30-40 |
800 |
130 |
|
DHG-02 |
4-5 |
200 |
40-50 |
1000 |
200 |
|
DHG-04 |
6-9 |
200 |
40-50 |
1000 |
300 |
|
DHG-06 |
10-17 |
200 |
50-70 |
1200 |
350 |
|
DHG-08 |
18-24 |
200 |
50-80 |
1400 |
470 |
Hot Tags: excavator flail mower attachment, China excavator flail mower attachment manufacturers, suppliers, factory
Send Inquiry
